Plug the headset in, pick it from the dropdown above, start the test, and speak with the boom two or three centimetres from the corner of your mouth. Then record and play it back.
How can I Test my Headset Microphone: the full method
- Connect and select
Plug the headset in, then choose it in the device dropdown. Connecting after the page loads means it will not appear until the list refreshes.
- Position the boom correctly
Two to three centimetres from the corner of your mouth, not directly in front of it. Straight-on placement is what causes popping on P and B sounds.
- Start the test and speak
Headset mics are close to your mouth, so expect peaks around -12 dB. If you are hitting 0 dB, lower the input volume rather than moving the boom away.
- Check the inline controls
Most headsets have a mute switch on the cable or an earcup, and many mute automatically when the boom rotates up.
- Test the earcups too
Switch to the Headphones panel and play the left and right tones. A headset is two devices sharing one plug.
- Record and listen
Play back a sentence and listen for breath noise and plosives — the two faults headsets are most prone to.
Headset microphone problems
- Cuts out when you turn your headA failing conductor near the plug or the earcup entry. Detachable cables are cheap to replace.
- Bluetooth headset mic unavailableBluetooth devices appear twice: as a stereo output and as a hands-free device. Only the hands-free profile carries the microphone.
- Popping on every PMove the boom to the side of your mouth rather than in front of it. A small foam windscreen finishes the job.
- One earcup silentCheck the balance control in your system audio settings before assuming the driver has failed.
- Muffled since newSome headsets ship with a protective film over the mic capsule. Check the boom tip.
Two devices, one connector
A headset is a pair of headphones and a microphone sharing a cable. They fail independently, and the operating system treats them as two separate devices with two separate volume controls and two separate default assignments.
That is why testing both halves matters. Earcups working perfectly proves nothing about the microphone, and a system correctly using the headset for output may still be recording from the laptop's built-in array.
Frequently asked
How do I stop hearing myself breathe?
Angle the boom away from your airflow rather than moving it further away, and keep the tip out of the direct path of your breath.
Why do headset mics sound better than laptop mics?
Proximity. At three centimetres your voice arrives far louder than the room does, and no software can replicate that advantage.
Can I use a gaming headset for calls and recording?
Yes for calls. For recording, gaming headsets favour intelligibility over accuracy, which sounds thin on playback.
Why does my headset mic pick up game audio?
The earcups are leaking into the microphone. Lower your headphone volume or use closed-back cups.
Related tests
Carry on with: testing speakers and mic together, the Windows 11 walkthrough, or testing on Windows 11.
Tested and updated · Written and maintained by check-mic.com · Report a problem with this page